Bar height farm table – Everyone loves a pub table because they are so versatile. Due to their size, they are easily stored away when not in use. In addition, a wooden pub table can add character to a dining room if not sad. They come in various sizes and shapes, but if you can not find one that matches your needs, you can always build your own.
Place the 36-inch MDF on a work table. Measure 8 inches from all four edges and make enough marks to draw a line around the perimeter of the table. Place the Square frames the marks to draw the lines. Put aside for now.
Place the two 20-inch MDF pieces on a work table. Make 16-inch marks from the four edges to give a square of 4 by 4 inches in the center. Next, make a mark in the center of each piece with two edges. Drill a countersunk hole with the drill bit on the mark. Be careful not to drill more than 3/8 of an inch deep. Set one of these aside for now. Drill eight countersink holes in 5-inch centers around the perimeter of the 20-inch piece of MDF. These holes will be used to secure the 36-inch MDF piece to the 20-inch MDF piece.
12 Bar Height Farm Table Design Photos